Bathroom Remodeling in White House, TN
Full gut or a lighter refresh. Tile, shower, vanity and layout, done by licensed local remodelers. Typical price here: $15,100 – $32,200.
What to know before you hire in White House
Housing in White House is fairly new (median year built 2002), so remodels here are mostly about finishes: swapping a fiberglass insert for a tiled walk-in shower, a bigger vanity, better lighting. With PEX lines in the walls, moving a drain or valve is cheaper than in older towns.
Prices in White House sit close to the US average. In practice that means $15,100 – $32,200 for a mid-range remodel.
Timeline: 3 to 6 weeks of work for a typical hall or primary bath, plus 1 to 4 weeks before start for design, permits and material lead times.
Estimate your bathroom remodel cost
Adjusted for labor and housing costs in White House.
Project level
Source: U.S. Census Bureau, American Community Survey 5-year estimates.
Bathroom Remodeling cost in White House
Installed price ranges adjusted for White House labor and housing costs. Your quote depends on size, condition and the products you choose.
Refresh
Same layout. New vanity, toilet, fixtures, lighting, paint and a tub or shower surround.
Mid-range remodel
Down to studs. New tile floor and shower walls, tub-to-shower conversion, fan, updated supply lines.
Upscale primary bath
Layout changes, curbless shower, double vanity, heated floor, custom glass and stone.
Cost breakdown
| Line item | Typical range |
|---|---|
| Demolition and disposal | $1,000 – $3,000 |
| Plumbing rough-in and valves | $1,500 – $5,500 |
| Tile (floor and shower walls), installed | $2,500 – $9,600 |
| Shower pan, waterproofing, niche | $900 – $3,200 |
| Vanity, top and faucet | $1,200 – $6,000 |
| Toilet, installed | $400 – $1,400 |
| Glass shower door / enclosure | $900 – $3,500 |
| Electrical, lighting, exhaust fan | $800 – $3,000 |
| Drywall, paint, trim | $700 – $2,200 |
| Permit and inspections | $200 – $1,200 |
Popular options
- Tub-to-shower conversion. The most requested change. Typically $7,000 to $16,000 with tile, less with an acrylic or solid-surface system.
- Curbless / walk-in shower. No step in, linear drain, often with a bench and grab bars. Good for aging in place and small rooms.
- Heated tile floor. Electric mat under tile, about $10 to $20 per sq ft installed. Popular in colder climates.
- Large-format porcelain. Fewer grout lines, less scrubbing. The floor has to be dead flat, so prep runs a bit higher.
Free bathroom remodel quote in White House
A licensed installer who works in Sumner County will measure and price it. No obligation.
Choosing an installer in White House
Residential and home improvement contractors above state thresholds are licensed by the Tennessee Board for Licensing Contractors.
- Verify the license or registration on the state lookup and match the name on the estimate.
- Ask for a certificate of general liability insurance and workers' comp, sent directly from the insurer.
- Get a written, line-item estimate: demo, plumbing, waterproofing, tile, fixtures, permit.
- Ask who pulls the permit. It should be the contractor, in their name.
- Ask which waterproofing system they use behind tile and whether it carries a warranty.
- Keep the deposit modest and tie later payments to finished milestones, not dates.
- Get labor and product warranties in writing before work starts.
How it works
In-home measure and scope
The remodeler checks the subfloor, venting, supply lines and drain locations, then writes a line-item scope.
Design and selections
Pick tile, vanity, fixtures and glass before demo starts. A back-ordered vanity can stall the job for weeks.
Permit
Most cities require a permit when plumbing, electrical or walls change. Your contractor should pull it in their name.
Demo, rough-in, inspection
The room is opened up, plumbing and electrical are roughed in and inspected before walls close.
Waterproofing and tile
A bonded membrane or liquid waterproofing goes on before tile. Skimp here and the shower fails in 5 years instead of 30.
Finish and final walkthrough
Vanity, toilet, glass, trim and paint, then final inspection and a punch list walk with you.
ZIP codes served
Nearby towns
Other towns in Tennessee
More bathroom services in White House
Questions from White House homeowners
How much does a bathroom remodel cost in White House?
Most White House homeowners pay $15,100 – $32,200 for a mid-range remodel. A cosmetic refresh starts around $6,500, and a large primary bath can reach $80,500. Local prices run close to the US average.
Does a bathroom contractor in White House need a license?
Residential and home improvement contractors above state thresholds are licensed by the Tennessee Board for Licensing Contractors. Also check with the Sumner County building department about permits for plumbing or electrical changes.
Which ZIP codes in White House are served?
Installers in our network cover 37188. If you live just outside them, call anyway. Most crews drive 20 to 40 miles for a job.
How long does it take?
Plan on 3 to 6 weeks of on-site work once demo starts. The schedule usually depends on the plumbing inspection and on special-order items like glass and vanities.
Do I need a permit?
Usually yes if plumbing, electrical, framing or ventilation changes. Swapping a vanity or toilet in the same spot usually does not. The contractor should pull the permit. If they ask you to pull it as the owner, that is a red flag.
Does a bathroom remodel add value?
At resale, a mid-range bath remodel usually gets back somewhere around two-thirds of what it cost, depending on the market. The bigger effect is speed of sale: buyers walk away from dated or water-stained bathrooms, and they notice the shower and vanity first.