(866) 332-0319
Walk-in Shower Conversions in Pembroke Pines, FL
Broward County, Florida

Walk-in Shower Conversions in Pembroke Pines, FL

Take out the tub you never use and put in a low or zero-step shower with a seat and grab bars. Typical price here: $9,200 – $17,300.

Licensed, insured contractors Free measure at your home No obligation to hire
Local notes

Walk-in Shower Conversions in Pembroke Pines, by the numbers

In Pembroke Pines, where the median house went up around 1992, a lot of hall and primary baths have a builder-grade tub that nobody uses. Pulling it for a walk-in shower with glass and a bench is a quicker, cheaper job than a full remodel.

Expect roughly $9,200 – $17,300 for a tiled walk-in shower in Pembroke Pines. Local labor rates and home values put the area about 8% above the US average.

A quick acrylic conversion with a low-threshold base costs about $4,900 – $9,800 here. Going fully curbless, with the floor lowered for zero entry, is closer to $14,100 – $27,100.

Timeline: An acrylic conversion takes 1 to 3 days. A tiled shower runs 1 to 2 weeks because the pan, waterproofing and grout each need time to cure. Curbless builds that lower the floor can take a bit longer.

Estimate your walk-in shower cost

Adjusted for labor and housing costs in Pembroke Pines.

Project level

Typical installed price$9,200 – $17,300
179,326residents in Pembroke Pines
1992median year built
70.8%owner-occupied homes
19.5%residents age 65+

Source: U.S. Census Bureau, American Community Survey 5-year estimates.

Local pricing

Walk-in Shower Conversions cost in Pembroke Pines

Installed price ranges adjusted for Pembroke Pines labor and housing costs. Your quote depends on size, condition and the products you choose.

Acrylic base + walls

$4,900 – $9,800 installed

Tub out, low-threshold shower pan, acrylic or solid-surface walls, new valve trim, curtain or basic door.

Tiled walk-in shower

$9,200 – $17,300 installed

Tub out, mortar or foam pan, full waterproofing, tile walls and floor, niche, glass door.

Curbless / barrier-free

$14,100 – $27,100 installed

Floor recessed for zero entry, linear drain, bench or fold-down seat, grab bars, frameless glass.

Cost breakdown

Line itemTypical range
Tub removal and disposal$400 – $1,300
Drain relocation and new shower valve$700 – $2,700
Shower pan (prefab or mortar bed)$500 – $2,700
Waterproofing membrane$400 – $1,600
Walls: acrylic panels or tile, installed$1,600 – $7,600
Glass door or panel$400 – $3,300
Seat, grab bars, niche$200 – $1,600
Subfloor work for curbless entryOften $0 – $4,300
Permit$100 – $700

Popular options

  • Low threshold vs curbless. A low-threshold base has a 2 to 4 inch lip. Curbless is truly flat, which matters for walkers and wheelchairs, but it usually means lowering the floor.
  • Seat and grab bars. A fold-down seat or a built-in bench plus two grab bars costs a few hundred dollars and is the most useful thing in the room as people get older. Blocking in the wall is cheapest to add now.
  • Hand shower on a slide bar. Lets someone shower seated and doubles as an easy way to rinse the walls.
  • Keep one tub in the house. If this is your only tub, think about resale. In most markets buyers with small kids want at least one bathtub somewhere in the house.

Free walk-in shower quote in Pembroke Pines

A licensed installer who works in Broward County will measure and price it. No obligation.

(866) 332-0319
Hiring locally

Choosing an installer in Pembroke Pines

Structural and plumbing work requires a contractor licensed through the Florida DBPR Construction Industry Licensing Board; some counties also license tile and remodeling trades.

  • Verify the license or registration on the state lookup and match the name on the estimate.
  • Ask for a certificate of general liability insurance and workers' comp, sent directly from the insurer.
  • Get a written, line-item estimate: demo, plumbing, waterproofing, tile, fixtures, permit.
  • Ask who pulls the permit. It should be the contractor, in their name.
  • Ask which waterproofing system they use behind tile and whether it carries a warranty.
  • Keep the deposit modest and tie later payments to finished milestones, not dates.
  • Get labor and product warranties in writing before work starts.
Bathroom project near Pembroke Pines, FL
Process

How it works

Measure and check the floor

The installer measures the alcove, finds the drain and joists, and checks for soft or rotted subfloor around the old tub.

Pick base, walls and glass

Prefab low-threshold base or tile, panel pattern or tile, and a door, fixed panel or curtain.

Tub out, drain moved

The tub comes out in pieces if it is cast iron. The drain is moved to the shower position and a new valve goes in at standing height.

Pan and waterproofing

The shower pan is set and sloped to the drain, then the walls are waterproofed. This is the step that decides if the shower leaks in five years.

Walls, glass, trim

Panels or tile go up, then the door, seat and grab bars. Silicone and grout cure before first use.

Service area

ZIP codes served

3302833082

Nearby towns

Other towns in Florida

More bathroom services in Pembroke Pines

FAQ

Questions from Pembroke Pines homeowners

How much does a tub-to-shower conversion cost in Pembroke Pines?

Most Pembroke Pines homeowners pay $9,200 – $17,300 for a tiled walk-in shower. An acrylic shower conversion starts around $4,900, and a curbless barrier-free shower can reach $27,100. Local prices run about 8% above the US average.

Does a bathroom contractor in Pembroke Pines need a license?

Structural and plumbing work requires a contractor licensed through the Florida DBPR Construction Industry Licensing Board; some counties also license tile and remodeling trades. Also check with the Broward County building department about permits for plumbing or electrical changes.

Which ZIP codes in Pembroke Pines are served?

Installers in our network cover 33028, 33082. If you live just outside them, call anyway. Most crews drive 20 to 40 miles for a job.

How long does it take?

An acrylic conversion is usually 1 to 3 days. A tiled shower takes 1 to 2 weeks with cure times for the pan, waterproofing and grout.

Does removing the tub hurt resale value?

Not if there is another tub in the house. If this is the only one, some buyers with young children will mind. In 55+ communities a walk-in shower is usually a selling point.

Is a walk-in shower or a walk-in tub better for seniors?

If the person can stand for a few minutes or is happy on a shower seat, a low or zero-step shower is cheaper, faster to use and easier to clean. A walk-in tub makes sense for people who want to soak or cannot stand at all.

Free estimate:(866) 332-0319